How can I get location of the problem areas where meshing is failing as below? Is it possible to get the coordinates like in case of edge/face intersection?
Found edge/face intersection: 2536 2571 with 2300 2538 2574 near (2605551.165279 4461514.282358 -5016.918969)
Trelis>mesh Volume 51
Meshing Volume 51 (Volume 51)
TetMeshGems mesher found!
WARNING: (1008460): WARNING 8460 %% OPTIMIZATION AND RESTART AGAIN
WARNING: (1008460): WARNING 8460 %% OPTIMIZATION AND RESTART AGAIN
WARNING: (1008460): WARNING 8460 %% OPTIMIZATION AND RESTART AGAIN
ERROR:
Found missing edge (2): 2680 2681
ERROR:
Found missing edge (2): 2976 2977
ERROR:
Found missing edge (2): 2680 2825
ERROR:
Found missing edge (2): 3452 3453
ERROR:
(-1008422): NUMBER OF MISSING FACES 4
ERROR:
Found missing face: 2679 2680 2681
ERROR:
Found missing face: 2680 2720 2825
ERROR:
Found missing face: 2975 2976 2977
ERROR:
Found missing face: 3442 3452 3453
ERROR:
(-1008480): ERR 8480
ERROR:
Unable to generate empty mesh
ERROR:
Volume 51 (Volume 51) meshing unsuccessful.
Meshing time: 16.016180
ERROR:
1 volume(s) did not mesh.
Volume(s) 51 did not mesh.